Stone carving machine software parameters

If all three axis is a machine screw transmission, if the lead is 10 the motor parameter is 0.00625, if the lead is 5 the motor parameter is 0.003125;

If X and Y axis to rack driving, Z axis as the lead screw transmission machine, X, Y axis motor parameters are 0.0098175, Z axis parameters according to the screw guide Cheng Laiding, if the lead is 10 the motor parameter is 0.00625, if the lead is 5 the motor parameter of 0.003125.

Jump frequency: 300;

The Z axis maximum speed: 1000;

Single spindle acceleration: 400;

Curve acceleration: 300