Stone carving machining efficiency

For processing industry, the number of products per unit time processing affects the cost and profit of the product. So is a stone carving machine, so how to improve the machining efficiency, try to reduce the processing cost For we do stone carving of friends, the most main is according to the raw material hardness and stone engraving cutter performance to determine a reasonable cutting dosage, also is what we usually call each layer depth under the knife. Of each material will be one of the biggest turning tool, we use stone engraving machine for processing time try not to use the biggest turning tool for machining, long processing, cutting tool damage more quickly. And under the maximum turning processing speed also do not go up, is likely to cause a quickly speed cutting knife. So we were not under the knife set to 2/3 of the maximum amount of such tool life will increase greatly, processing speed can also increase a lot; So that both can save the tooling cost, also can improve the machining efficiency.

We can also according to the actual situation to rough machining precision work again, rough machining, as far as possible to remove all allowance, save the finishing time; Still can use processing better performance of cutting tool materials. Stone carving machine performance is not only reflected in the hardware configuration of the machine, need we accumulated bit by bit processing experience, improve processing efficiency.